aDriv4 website!

Linux server192.web-hosting.com 4.18.0-513.18.1.lve.el8.x86_64 #1 SMP Thu Feb 22 12:55:50 UTC 2024 x86_64
LiteSpeed
198.54.114.198

File Name : jquery.flot.stack.js

/* Flot plugin for stacking data sets rather than overlyaing them.

The plugin assumes the data is sorted on x (or y if stacking horizontally).
For line charts, it is assumed that if a line has an undefined gap (from a
null point), then the line above it should have the same gap - insert zeros
instead of "null" if you want another behaviour. This also holds for the start
and end of the chart. Note that stacking a mix of positive and negative values
in most instances doesn't make sense (so it looks weird).

Two or more series are stacked when their "stack" attribute is set to the same
key (which can be any number or string or just "true"). To specify the default
stack, you can set the stack option like this:

series: {
		stack: null/false, true, or a key (number/string)
	}

You can also specify it for a single series, like this:

$.plot( $("#placeholder"), [{
		data: [ ... ],
		stack: true
	}])

The stacking order is determined by the order of the data series in the array
(later series end up on top of the previous).

Internally, the plugin modifies the datapoints in each series, adding an
offset to the y value. For line series, extra data points are inserted through
interpolation. If there's a second y value, it's also adjusted (e.g for bar
charts or filled areas).

(function ($) {
    var options = {
        series: { stack: null } // or number/string
    };

function init(plot) {
        function findMatchingSeries(s, allseries) {
            var res = null;
            for (var i = 0; i < allseries.length; ++i) {
                if (s == allseries[i])
                    break;

if (allseries[i].stack == s.stack)
                    res = allseries[i];
            }

return res;
        }

function stackData(plot, s, datapoints) {
            if (s.stack == null || s.stack === false)
                return;

var other = findMatchingSeries(s, plot.getData());
            if (!other)
                return;

var ps = datapoints.pointsize,
                points = datapoints.points,
                otherps = other.datapoints.pointsize,
                otherpoints = other.datapoints.points,
                newpoints = [],
                px, py, intery, qx, qy, bottom,
                withlines = s.lines.show,
                horizontal = s.bars.horizontal,
                withbottom = ps > 2 && (horizontal ? datapoints.format[2].x : datapoints.format[2].y),
                withsteps = withlines && s.lines.steps,
                fromgap = true,
                keyOffset = horizontal ? 1 : 0,
                accumulateOffset = horizontal ? 0 : 1,
                i = 0, j = 0, l, m;

while (true) {
                if (i >= points.length)
                    break;

l = newpoints.length;

if (points[i] == null) {
                    // copy gaps
                    for (m = 0; m < ps; ++m)
                        newpoints.push(points[i + m]);
                    i += ps;
                }
                else if (j >= otherpoints.length) {
                    // for lines, we can't use the rest of the points
                    if (!withlines) {
                        for (m = 0; m < ps; ++m)
                            newpoints.push(points[i + m]);
                    }
                    i += ps;
                }
                else if (otherpoints[j] == null) {
                    // oops, got a gap
                    for (m = 0; m < ps; ++m)
                        newpoints.push(null);
                    fromgap = true;
                    j += otherps;
                }
                else {
                    // cases where we actually got two points
                    px = points[i + keyOffset];
                    py = points[i + accumulateOffset];
                    qx = otherpoints[j + keyOffset];
                    qy = otherpoints[j + accumulateOffset];
                    bottom = 0;

if (px == qx) {
                        for (m = 0; m < ps; ++m)
                            newpoints.push(points[i + m]);

newpoints[l + accumulateOffset] += qy;
                        bottom = qy;

i += ps;
                        j += otherps;
                    }
                    else if (px > qx) {
                        // we got past point below, might need to
                        // insert interpolated extra point
                        if (withlines && i > 0 && points[i - ps] != null) {
                            intery = py + (points[i - ps + accumulateOffset] - py) * (qx - px) / (points[i - ps + keyOffset] - px);
                            newpoints.push(qx);
                            newpoints.push(intery + qy);
                            for (m = 2; m < ps; ++m)
                                newpoints.push(points[i + m]);
                            bottom = qy;
                        }

j += otherps;
                    }
                    else { // px < qx
                        if (fromgap && withlines) {
                            // if we come from a gap, we just skip this point
                            i += ps;
                            continue;
                        }

for (m = 0; m < ps; ++m)
                            newpoints.push(points[i + m]);

// we might be able to interpolate a point below,
                        // this can give us a better y
                        if (withlines && j > 0 && otherpoints[j - otherps] != null)
                            bottom = qy + (otherpoints[j - otherps + accumulateOffset] - qy) * (px - qx) / (otherpoints[j - otherps + keyOffset] - qx);

newpoints[l + accumulateOffset] += bottom;

i += ps;
                    }

fromgap = false;

if (l != newpoints.length && withbottom)
                        newpoints[l + 2] += bottom;
                }

// maintain the line steps invariant
                if (withsteps && l != newpoints.length && l > 0
                    && newpoints[l] != null
                    && newpoints[l] != newpoints[l - ps]
                    && newpoints[l + 1] != newpoints[l - ps + 1]) {
                    for (m = 0; m < ps; ++m)
                        newpoints[l + ps + m] = newpoints[l + m];
                    newpoints[l + 1] = newpoints[l - ps + 1];
                }
            }

datapoints.points = newpoints;
        }

plot.hooks.processDatapoints.push(stackData);
    }

$.plot.plugins.push({
        init: init,
        options: options,
        name: 'stack',
        version: '1.2'
    });
})(jQuery);

Name	Type	Size	Owner/Group	Permission	Last Modified	Actions
.	dir	-	root/root	0755	2025-07-19 10:33:31
..	dir	-	root/root	0755	2025-07-19 10:33:31
jquery.flot.js	text/plain	116.26 KB	root/root	0644	2025-07-17 12:19:26
jquery.flot.min.js	text/plain	34.76 KB	root/root	0644	2025-07-17 12:19:26
jquery.flot.pie.js	text/plain	23.06 KB	root/root	0644	2025-07-17 12:19:26
jquery.flot.pie.min.js	text/plain	7.75 KB	root/root	0644	2025-07-17 12:19:26
jquery.flot.resize.js	text/plain	2.45 KB	root/root	0644	2025-07-17 12:19:26
jquery.flot.resize.min.js	text/plain	1.15 KB	root/root	0644	2025-07-17 12:19:26
jquery.flot.stack.js	text/plain	6.75 KB	root/root	0644	2025-07-17 12:19:26
jquery.flot.stack.min.js	text/plain	1.27 KB	root/root	0644	2025-07-17 12:19:26
jquery.flot.time.js	text/plain	11.45 KB	root/root	0644	2025-07-17 12:19:26
jquery.flot.time.min.js	text/plain	4.51 KB	root/root	0644	2025-07-17 12:19:26

For more Private tool come to me!

https://t.me/aDriv4vz